Geometry “D”
• Turn: 2/3 (kinematic ratio: number of rotor steps/ number of stator steps);
• Productivity: 100%;
• Differ. pressure: 12 bar (the differential pressure of the pump consists of the sum of pressure drops in all chambers).
Advantages of “D” geometry
• Very small dimensions at high pressure and productivity;
• Pulseless pumping;
• High accuracy of dosing.
It should be noted that the clamp with geometry “D” is “closing”, that is, liquid will not flow through it when the pump is stopped.
Parameters
• Grain size from 1 to 4 mm, depending on the type of material.
• The maximum working pressure is 40 bar.
• Productivity l/min. at 400 rpm 25 liters
Application: for plastering walls and pouring floors.
