Geometry “L”
Turns: 1/2 (kinematic ratio: number of rotor steps/ number of stator steps)
• Productivity: 200%;
• Differ. pressure: 6 bar (the differential pressure of the pump consists of the sum of the pressure differences in all chambers). Advantages of “L” geometry
Good volumetric characteristics with a long maintenance period due to a long contact line between the rotor and the stator
• Compact dimensions with high productivity
•Lower friction speed
Parameters
• Grain size from 1 to 5 mm;
• The maximum working pressure is 25 bar.
• Productivity l/min. at 400 rpm 35 liters
Application: for pouring the floor
